Orbis Calorama Pilot and Main Injector Bracket

  • Model: P17H00105


Got Questions about this product? Click here

$35.00

NOTE:  Photo is incorrect.  Close, but a different part.  The correct bracket has 3 holes with brass screws, not 1 as pictured.  If you look at the Maintenance Kit for the Calorama, the photo includes the correct part

This bracket, part P17H00105, fits all Orbis Calorama and Comfortview heaters.  The bracket now ships WITH a new gasket (part CCV-5017A) plus a new pilot access gasket (part CCV-5003), both installed.

In addition, the pilot orifice inside this bracket can be difficult to remove.  If you plan to reuse the pilot orifice from your old bracket, make sure you can get it out before placing your order. If it has been installed for many years, it is likely that corrosion has welded it to the bracket. The best way we have found to remove the used orifice is to insert a 1/4" sharp drill bit, then turn clockwise (might need pliars or a locking wrench).  The pilot orifice part number is 5006P for LP or 5006N for natural gas.  If the pilot orifice cannot be removed, the bracket must be replaced.  

 


(image for) Sold Out

wabusiness template